Home - Games - Three-step Maintenance Of Outdoor Playsets
...

Three-step maintenance of outdoor playsets

A newly bought and assembled wooden playset is an absolute delight to behold. It is aesthetically very appealing and a lot of fun to play on. However, beauty doesn’t last forever even in playsets! It is therefore your responsibility to make your playset look as charming as it now is, even after your kids are done with their fun and games. Buying a wooden playset is quite an investment as the money spent on the original purchase reduces the amount you would spend on maintenance. If you properly care for your playset, it will not only retain value but also add to its resale value!

Three-step maintenance of outdoor playsets
Since all outdoor playsets are exposed to the whims and atrocities of extreme temperatures, it is important you maintain them bi-annually, here’s how!

Inspect and tighten
After the snow melts and the temperatures rise, it is important you thoroughly inspect your wooden playsets. Begin with examining bolts and make sure they are completely tightened. You must also check for rough spots on the swing sets and see if the sides and edges need sanding. You must also ensure that all the accessories are in good condition. Check for cracks on exposed metal edges or plastic accessory. For the sake of preventive maintenance, ensure you re-tighten and inspect your wooden playsets every 3 months to avoid potential accidents and lengthen your kids’ fun time!

Wash
Once you are done inspecting the playset, it is important you pressure wash the wood to remove any oxidized sealants and particulates. Washing not only helps clean the playset it enables deeper penetration of new sealant and minimizes the time to re-seal While hosing down your playset, you may use a solution of bleach and water solution to ensure a crystal clean wash of your accessories! To clean plastic surfaces, you could use a solution of soap and water to remove the built-up dirt during colder months. It is recommended that you clean swings, slides, toys and the like with the soapy solution.

Apply water seal
Make sure that you allow the wood to dry for at least two days before applying a fresh coat of sealant. It is recommended that you use an oil based custom color on your playsets to ensure greater protection of the wood. Such a coat is usually more durable than water based sealants. Once you are done applying the required coat, allow your playset a day to dry off.

Disclaimer:
The content provided on our blog site traverses numerous categories, offering readers valuable and practical information. Readers can use the editorial team’s research and data to gain more insights into their topics of interest. However, they are requested not to treat the articles as conclusive. The website team cannot be held responsible for differences in data or inaccuracies found across other platforms. Please also note that the site might also miss out on various schemes and offers available that the readers may find more beneficial than the ones we cover.
Prev
Make the odds turn in your favor!

Make the odds turn in your favor!

Read More
Next
Common types of playsets

Common types of playsets

Read More